Lift Kits in Utah
Conditional
Utah caps frame height at 24, 26, or 28 inches by GVWR class, limits the body floor to 3 inches above the top of the frame, and prohibits frame stacking.
Verified against primary sources · August 2026
What the law says
This is the same section that sets Utah's 3-inch minimum ground clearance for lowered vehicles.
Specific Limits
- Frame max
- 24 in under 4,500 lb GVWR; 26 in 4,500 to under 7,500 lb; 28 in 7,500 lb and over
- Frame stacking
- prohibited
- Body above frame
- 3 in
Frequently Asked Questions
Are lift kits legal in Utah?
Utah caps frame height at 24, 26, or 28 inches by GVWR class, limits the body floor to 3 inches above the top of the frame, and prohibits frame stacking.
What are the exact lift kits limits in Utah?
Frame max: 24 in under 4,500 lb GVWR; 26 in 4,500 to under 7,500 lb; 28 in 7,500 lb and over. Frame stacking: prohibited. Body above frame: 3 in. Source: Utah Code § 41-6a-1631.
Street-legal lift kits picks
Gear that helps you mod without a ticket in Utah.
Leveling kit (2–2.5″)
A modest lift that stays under most state frame- and bumper-height limits.
Shop on AmazonSuspension lift kit
Going taller? Check your state's bumper and frame height caps before you order.
Shop on AmazonAs an Amazon Associate, Is My Mod Legal earns from qualifying purchases made through these links, at no extra cost to you. We only recommend gear that helps you stay street-legal.